[Mar-2024] Updated Citrix 1Y0-440 Dumps – PDF & Online Engine
1Y0-440.pdf - Questions Answers PDF Sample Questions Reliable
Citrix 1Y0-440 exam is intended for experienced IT professionals who have a strong understanding of networking concepts and technologies. It is recommended that candidates have at least three years of experience in networking, virtualization, and cloud computing. 1Y0-440 exam consists of 64 multiple-choice questions and must be completed within 90 minutes. The passing score for the exam is 66%.
NEW QUESTION # 71
Scenario: Based on a discussion between a Citrix Architect and a team of Workspacelab members, the MPX Logical layout for Workspacelab has been created across three (3) sites.
They captured the following requirements during the design discussion held for a Citrix ADC design project:
* All three (3) Workspacelab sites (DC, NDR, and DR) will have similar NetScaler configurations and design.
* Both external and internal NetScaler MPX appliances will have Global Server Load Balancing (GSLB) configured and deployed in Active/Passive mode.
* GSLB should resolve both A and AAA DNS queries.
* In the GSLB deployment, the NDR site will act as backup for the DC site, whereas the DR site will act as backup for the NDR site.
* When the external NetScaler replies to DNS traffic coming in through Cisco Firepower IPS, the replies should be sent back through the same path.
* On the internal NetScaler, both the front-end VIP and backend SNIP will be part of the same subnet.
* The external NetScaler will act as default gateway for the backend servers.
* All three (3) sites, DC, NDR, and DR, will have two (2) links to the Internet from different service providers configured in Active/Standby mode.
Which design decision must the architect make the design requirements above?
- A. The Internal NetScaler must be deployed in Transparent mode.
- B. MAC-based Forwarding must be enabled on the External NetScaler Pair.
- C. The ADNS service must be configured with an IPv6 address.
- D. NSIP of the External NetScaler must be configured as the default gateway on the backend servers.
Answer: A
NEW QUESTION # 72
Scenario: A Citrix Architect has set up NetScaler MPX devices in high availability mode with version 12.0.53.13 nc. These are placed behind a Cisco ASA 5505 Firewall. The Cisco ASA Firewall is configured to block traffic using access control lists. The network address translation (NAT) is also performed on the firewall.
The following requirements were captured by the architect during the discussion held as part of the NetScaler security implementation project with the customer's security team:
The NetScaler MPX device:
should monitor the rate of traffic either on a specific virtual entity or on the device. It should be able to mitigate the attacks from a hostile client sending a flood of requests. The NetScaler device should be able to stop the HTTP, TCP, and DNS based requests.
needs to protect backend servers from overloading.
needs to queue all the incoming requests on the virtual server level instead of the service level.
should provide protection against well-known Windows exploits, virus-infected personal computers, centrally managed automated botnets, compromised webservers, known spammers/hackers, and phishing proxies.
should provide flexibility to enforce the decided level of security check inspections for the requests originating from a specific geolocation database.
should block the traffic based on a pre-determined header length, URL length, and cookie length. The device should ensure that characters such as a single straight quote ("); backslash (\); and semicolon (;) are either blocked, transformed, or dropped while being sent to the backend server.
Which security feature should the architect configure to meet these requirements?
- A. Global Server Load Balancing with DNS views
- B. Global Server Load balancing with Dynamic RTT
- C. Geolocation-based blocking using Application Firewall
- D. Global Server Load Balancing with Mac Based Forwarding
- E. geolocation-based blocking using Responder policies
Answer: C
NEW QUESTION # 73
Scenario: A Citrix Architect needs to design a new multi-datacenter Citrix ADC deployment. The customer wants Citrix ADC to provide access to various backend resources by using Global Server Load Balancing (GSLB) in an Active-Active deployment. Click the Exhibit button to view additional requirements identified by the architect.
Which GSLB algorithm or method should the architect use for the deployment based on the stated requirements?
- A. Least packets
- B. Static proximity
- C. Least response time
- D. Dynamic round trip time (RTT)
- E. Source IP hash
- F. Least connections
Answer: B
NEW QUESTION # 74
Scenario: A Citrix Architect needs to assess an existing NetScaler multi-site deployment. The deployment is using Global Server Load Balancing (GSLB) configured in a parent-child configuration.
Click the Exhibit button to view the diagram of the current GSLB configuration and parent-child relationships, as well as the status of the sites and the connectivity between them.
Based on the displayed configuration and status, Child_site1_______ a connection from _______. (Choose the correct option to complete the sentence.)
- A. does NOT receive; SiteP2 and SiteP3; remains a child site of SiteP1
- B. rejects; SiteP3; remains a child site of SiteP1
- C. accepts; SiteP3; becomes its child site
- D. accepts; SiteP2; becomes its child site
- E. rejects; SiteP2; remains a child site of SiteP1
- F. rejects; SiteP2 and SiteP3; remains a child site of SiteP1
Answer: D
NEW QUESTION # 75
A Citrix Architect can execute a configuration job using a DeployMasterConfiguration template on a Citrix ADC____deployed________. (Choose the correct option to complete sentence:
- A. CPX: without partitions
- B. MPX; as a cluster Instance
- C. CPX; In high availability
- D. SDX; with more than 6 partitions
- E. MPX; In high availability
Answer: E
NEW QUESTION # 76
Scenario: A Citrix Architect needs to design a NetScaler deployment in Microsoft Azure. An Active-Passive NetScaler VPX pair will provide load balancing for three distinct web applications. The architect has identified the following requirements:
* Minimize deployment costs where possible.
* Provide dedicated bandwidth for each web application.
* Provide a different public IP address for each web application.
For this deployment, the architect should configure each NetScaler VPX machine to have ______ network interface(s) and configure IP address by using ________. (Choose the correct option to complete the sentence).
- A. 1; Port Address Translation
- B. 4; Network Address Translation
- C. 1; Network Address Translation
- D. 2; Network Address Translation
- E. 4; Port Address Translation
- F. 2; Port Address Translation
Answer: A
NEW QUESTION # 77
Scenario: The Workspacelab team has implemented Citrix ADC high availability pair and Citrix ADC Management and Analytics System (Citrix Application Delivery Management). The Citrix Application Delivery Management was configured by a Citrix Architect to monitor and manage these devices. The Workspacelab team wants to load balance their Microsoft SharePoint servers on the Citrix ADC and needs the process to be streamlined and administered using Citrix Application Delivery Management.
The following requirements were discussed during the meeting:
The Microsoft SharePoint server should be optimized, load balanced, and secured in the network and should be deployed using Citrix Application Delivery Management.
All the configurations should be yenned before getting pushed to the Citrix Application Delivery Management.
Which feature should the architect use to configure the Microsoft SharePoint server using Citrix Application Delivery Management?
- A. Jobs Analytics
- B. Orchestration
- C. StyleBooks
- D. Configuration
Answer: C
NEW QUESTION # 78
Scenario: A Citrix Architect needs to design a new multi-datacenter NetScaler deployment. The customer wants NetScaler to provide access to various backend resources by using Global Server Load Balancing (GSLB) in an Active-Active deployment.
Click the Exhibit button to view additional requirements identified by the architect.
Which GSLB algorithm or method should the architect use for the deployment, based on the stated requirements?
- A. Least packets
- B. least connection
- C. Dynamic round trip time (RTT)
- D. Source IP hash
- E. Static proximity
- F. Least response time
Answer: F
NEW QUESTION # 79
Scenario: A Citrix Architect is asked by management at the Workspacelab organization to review their existing configuration and make the necessary upgrades. The architect recommends small changes to the pre-existing Citrix ADC configuration. Currently, the Citrix ADC MPX devices are configured in a high availability pair, and the outbound traffic is load balanced between two Internet service providers (ISPs).
However, the failover is NOT happening correctly. The following requirements were discussed during the design requirement phase:
* The return traffic for a specific flow should be routed through the same path while using Link Load Balancing.
* The link should fail over even if the ISP router is up and intermediary devices to an ISP router are down.
* Traffic going through one ISP router should fail over to the secondary ISP, and the traffic should NOT flow through both routers simultaneously. What should the architect configure to meet this requirement?
- A. Ping Monitor
- B. Transparent monitor
- C. HTTP-ECV monitor without secure option enabled
- D. HTTP-ECV monitor wit" secure option enabled
Answer: B
NEW QUESTION # 80
Scenario: A Citrix Architect has deployed load balancing for SharePoint 2010 on a Citrix ADC instance.
While editing the document, the architect observed the error displayed below:
Sorry, we couldn't open 'https://sharepointcs.emea.in/Shared Documents/Citrix Enhancement Request Form.doc' After troubleshooting, the architect discovers the issue. When a user opens a document, it opens in the browser, but while editing the document, thd session is transferred from the browser to the Word application During this time, the cookies should be transferred from the browser to the Word application.
Which two configurations should the architect modify to ensure that the cookies are shared between the browser and non-browser applications? (Choose two.)
- A. Set HTTPOnly Cookie to NO
- B. Set HTTPOnly Cookie to Yes
- C. Disable Persistent Cookie
- D. Set lb vserver -persistenceType COOKIEINSERT
- E. Set the NSC_AAAC cookie with HTTPOnly Flag
- F. Enable Persistent Cookie
Answer: A,F
NEW QUESTION # 81
Scenario: A Citrix Architect has executed the following commands on the Citrix ADC:
In which scenario will the timeout work as configured?
- A. If a session is idle, then the client browser will keep on sending HTTP Requests in which URL will contain UA=0
- B. If a session is idle, then the client browser will keep on sending HTTP Responses in which URL will contain UA!=
- C. If a session is non-idle, then the client browser will send an HTTP Request in which the URL will contain UA=0'
- D. If a session is non-idle, then the client browser will send an HTTP Response in which the URL will contain UA!=
Answer: C
NEW QUESTION # 82
Which two NetScaler cookies indicate the validity of the Authentication, Authorization and Accounting (AAA) session for users? (Choose two.)
- A. NSC_AAAC
- B. NSC_TMAS
- C. NSC_WT
- D. NSC_TMAA
Answer: B,D
Explanation:
Explanation/Reference: https://support.citrix.com/article/CTX202900
NEW QUESTION # 83
Scenario: Based on a discussion between a Citrix Architect and a team of Workspacelab members, the MPX Logical layout for Workspacelab has been created across three (3) sites.
They captured the following requirements during the design discussion held for a Citrix ADC design project:
* All three (3) Workspacelab sites (DC NDR and DR) will have similar Citrix ADC configurations and design
* Both external and internal Citrix ADC MPX appliances will have Global Server Load Balancing (GSLB) configured and deployed in Active/Passive mode
* GSLB should resolve both A and AAA DNS queries.
* In the GSLB deployment the NDR site will act as backup for the DC site, whereas the DR site will act as backup for the NDR site
* When the external Citrix ADC replies to DNS traffic coming in through Cisco Firepower IPS the replies should be sent back through the same path
* On the internal Citrix ADC. both front-end VIP and back-end SNIP will be part of the same subnet
* USIP is configured on the DMZ Citrix ADC appliances
* The external Citrix ADC will act as default gateway for back-end servers.
* All three (3) sites (DC, NDR, and DR) will have two (2) links to the Internet from different service providers configured in Active/Standby mode Which design decision must the architect make to meet the design requirements above?
- A. The SNIP of the internal Citrix ADC must be configured as the default gateway on the back-end servers.
- B. Interface 0/1 must be used for DNS traffic
- C. The SNIP of the external Citrix ADC must be configured as default gateway on the back-end servers
- D. ADNS service must be used with IPv6 address
- E. Mac Based Routing must be configured on the External Citrix ADC
Answer: A
NEW QUESTION # 84
Which two features are supported on LbaaSV1? (Choose two.)
- A. Layer 4 Load balancing
- B. Certificate Bundle
- C. Cookie Insertion
- D. Layer 7 Load Balancing
- E. Server name Indicator
Answer: A,E
NEW QUESTION # 85
Scenario: A Citrix Architect is asked by management at the Workslab organization to review their existing configuration and make the necessary upgrades. The architect recommends small changes to the pre-existing NetScaler configuration. Currently, the NetScaler MPX devices are configured in a high availability pair, and the outbound traffic is load-balanced between two Internet service providers 9ISPs). However, the failover is NOT happening correctly.
The following requirements were discussed during the design requirements phase:
* The return traffic for a specific flow should be routed through the same path while using Link Load Balancing.
* The link should fail over if the ISP router is up and intermediary devices to an ISP router are down.
* Traffic going through one ISP router should fail over to the secondary ISP, and the traffic should NOT flow through both routers simultaneously.
What should the architect configure with Link Load balancing (LLB) to meet this requirement?
- A. Mac-based forwarding option enabled.
- B. Resilient deployment mode
- C. Backup route
- D. Net Profile
Answer: C
NEW QUESTION # 86
Scenario: A Citrix Architect needs to design a hybrid Citrix Virtual App and Citrix Virtual Desktop environment which will include as well as resource locations in an on-premises datacenter and Microsoft Azure.
Organizational details and requirements are as follows:
Active Citrix Virtual App and Citrix Virtual Desktop Service subscription No existing Citrix deployment Minimization of additional costs All users should use same access point, regardless of network location No multi-factor authentication is required Click the Exhibit button to view the conceptual environment architecture.
The architect should use___________ in Location A, and should use _______________ in Location B. (Choose the correct option to complete the sentence.)
- A. Citrix Gateway as a Service; no Citrix ADC products
- B. Citrix Gateway as a Service; Citrix ICA Proxy (cloud-licensed)
- C. No Citrix ADC products; Citrix ADC (BYO)
- D. Citrix gateway as a Service; Citrix ADC (BYO)
- E. No Citrix ADC products; Citrix ICA Proxy (cloud-licensed)
- F. No Citrix ADC products; Citrix Gateway appliance
Answer: A
NEW QUESTION # 87
Scenario: A Citrix Architect has deployed two MPX devices. 12.0.53.13 nc and MPX 11500 models, in a high availability (HA) pair for the Workspace labs team. The deployment method is two-arm and the devices are installed behind a CISCO ASA 5585 Firewall. The architect enabled the following features on the Citrix ADC devices. Content Switching. SSL Offloading, Load Balancing, Citrix Gateway. Application Firewall in hybrid security and Appflow. All are enabled to send monitoring information to Citrix Application Delivery Management 12.0.53.13 nc build. The architect is preparing to configure load balancing for Microsoft Exchange 2016 server.
The following requirements were discussed during the implementation:
* All traffic needs to be segregated based on applications, and the fewest number of IP addresses should be utilized during the configuration.
* All traffic should be secured and any traffic coming Into FITTP should be redirected to HTTPS.
* Single Sign-on should be created for Microsoft Outlook web access (OWA).
* Citrix ADC should recognize Uniform Resource Identifier (URI) and close the session to Citrix ADC when users hit the Logoff button In Microsoft Outlook web access.
* Users should be able to authenticate using either user principal name (UPN) or sAMAccountName.
* The Layer 7 monitor should be configured to monitor the Microsoft Outlook web access servers and the monitor probes must be sent on SSL.
Which monitor will meet these requirements?
- A. add lb monitor mon.rpc HTTP-ECV -send "GET /owa/healthcheck.htm" recv 200 -LRTM ENABLED
- B. add lb monitor mon.rpc HTTP-ECV -send "GET /rpc/healthcheck.htm" recv 200 -LRTM DISABLED
-secure YES - C. add lb monitor mon.rpc HTTP-ECV -send "GET /rpc/healthcheck.htm" recv 200 -LRTM ENABLED
- D. add lb monitor mon.rpc HTTP-ECV -send "GET /owa/healthcheck.htm" recv 200 -LRTM DISABLED
- E. add lb monitor mon.rpc HTTP -send "GET /rpc/healthcheck.htm" recv 200 -LRTM DISABLED -secure YES
Answer: B
NEW QUESTION # 88
Scenario: A Citrix Architect needs to design a new Citrix Gateway deployment. During the design discussions, the architect documents the key requirements about when to provide VPN access for incoming connections to the Citrix Gateway virtual server. Click the Exhibit button to view the requirements.
Which policy expression will meet these requirements?
- A. Option C
- B. Option D
- C. Option A
- D. Option B
- E. Option E
Answer: C
NEW QUESTION # 89
Scenario: A Citrix Architect needs to assess an existing NetScaler Gateway deployment. During the assessment, the architect collected key requirements for VPN users, as well as the current session profile settings that are applied to those users.
Click the Exhibit button to view the information collected by the architect.
Which configurations should the architect change to meet all the stated requirements?
- A. Item 1
- B. Item 3
- C. Item 5
- D. Item 2
- E. Item 4
Answer: A
NEW QUESTION # 90
Scenario: A Citrix Architect needs to design a hybrid XenApp and XenDesktop environment which will include Citrix Cloud as well as resource locations in an on-premises datacenter and Microsoft Azure.
Organizational details and requirements are as follows:
* Active XenApp and XenDesktop Service subscription
* No existing NetScaler deployment
* Global Server Load Balancing is used to direct connection requests to Location B, if the StoreFront server in Location B fails, connections should be directed to Location A.
Click the Exhibit button to view the conceptual environment architecture.
The architect should use _____ in Location A, and should use ________ in Location B. (Choose the correct option to complete the sentence.)
- A. NetScaler ADC (BYO); NetScaler ADC (BYO)
- B. NetScaler Gateway appliance; NetScaler Gateway appliance
- C. NetScaler ADC (BYO); NetScaler gateway appliance
- D. NetScaler ADC (BYO); No NetScaler products
- E. NetScaler Gateway appliance; NetScaler ADC (BYO)
Answer: D
Explanation:
Explanation/Reference:
NEW QUESTION # 91
......
Citrix 1Y0-440 Dumps PDF Are going to be The Best Score: https://freedownload.prep4sures.top/1Y0-440-real-sheets.html