New Prep4sures 2V0-41.20 Exam Questions| Real 2V0-41.20 Dumps Updated on Sep 21, 2022
2V0-41.20 Braindumps – 2V0-41.20 Questions to Get Better Grades
For more info read reference:
NEW QUESTION 18
Which command is used to display the network configuration of the Tunnel Endpoint (TEP) IP on a bare metal transport node?
- A. tcpdump
- B. ifconfig
- C. debug
- D. ipconfig
Answer: B
NEW QUESTION 19
Which NSX CLI command is used to check the GENEVE tunnel status on ESXi transport node?
- A. get transport-node tunnel state
- B. get transport-node tunnel status
- C. get host-switch <Host-Switch-Name> tunnel status
- D. get host-switch <Host-Switch-Name> tunnels
Answer: D
Explanation:
Reference:
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/8264605c-a5e1-49a8-b603-cc78621eeeab/cli.html#get%20host-switch%20%3Chost-switch-name%3E%20tunnels
NEW QUESTION 20
A customer is preparing to deploy VMware Kubernetes on an NSX-T Data Center.
What is the minimum MTU size for the UPLINK profile?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 21
An NSX administrator has configured a load balancer virtual server on a Tier-1 Gateway.
In order to advertise the load balancer virtual IP to the Tier-0 Gateway, which route advertisement configuration has to be done on the Tier-1 Gateway? (Choose two.)
- A. Advertise All LB VIP Routes
- B. Information
- C. All Static Routes
- D. Advertise All LB SNAT IP Routes
- E. Advertise All NAT Routes
Answer: A,D
Explanation:
Explanation
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-EEBA627A-0860-477A-95
NEW QUESTION 22
Which NSX CLI command is used to check the GENEVE tunnel status on ESXi transport node?
- A. get transport-node tunnel state
- B. get transport-node tunnel status
- C. get host-switch <Host-Switch-Name> tunnel status
- D. get host-switch <Host-Switch-Name> tunnels
Answer: D
NEW QUESTION 23
Which two BGP configuration parameters can be configured in the VRF Lite gateways? (Choose two.)
- A. Graceful Restart
- B. Local AS
- C. BGP Neighbors
- D. Route Aggregation
- E. Route Distribution
Answer: C,D
Explanation:
Explanation
The following parameters are inherited from the default Tier-0 gateway and cannot be modified at the VRF level:
* Local AS
* Graceful restart
* Graceful restart timer
* Graceful restart stale timer
* Multipath relax
Inter-SR iBGP is not supported in VRF gateways.
BGP can be enabled or disabled per VRF gateway.
Route aggregation and BGP neighbors are local configurations per VRF.
NEW QUESTION 24
An NSX administrator is troubleshooting a connectivity issue with virtual machines running on an ESXi transport node.
Which feature in the NSX UI shows the mapping between the virtual NIC and the host's physical adapter?
- A. Switch Visualization
- B. IPFIX
- C. Port Mirroring
- D. Activity Monitoring
Answer: A
NEW QUESTION 25
Which CLI command is used to start the NSX Manager virtual machine in the KVM environment?
- A. virsh start <NSX-Manager-ID>
- B. virsh start <NSX-Manager-Name>
- C. virsh poweron <nsx-manager-name>
- D. virsh poweron <nsx-manager-ID>
Answer: B
NEW QUESTION 26
Which CLI command is used to disable SSH timeout on NSX Manger and NSX Edge nodes?
- A. set cli-timeout 0
- B. nsxcli ssh session on
- C. set cli ssh timeout 0
- D. set esxcli ssh session off
Answer: A
NEW QUESTION 27
Which tool injects packets and provides various observation points along the packet's path between two NSX-T managed objects?
- A. SPAN mirrors
- B. IPFIX
Reference: https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=7&ved=2ahUKEwjw0duct_nmAhUJ1BoKHVrgACcQFjAGegQIBxAC&url=ftp%3A%2F%2Fftp.inwinstack.com%2FOther%2FAI-NSX-T%2FVMware% 2FVMWare%2520NSX-T%2FDocuments% 2Fnsxt_21_admin.pdf&usg=AOvVaw2DqQfqPkhzWQfiJP2SgNbO (213) Reference: https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=7&ved=2ahUKEwjw0duct_nmAhUJ1BoKHVrgACcQFjAGegQIBxAC&url=ftp%3A%2F%2Fftp.inwinstack.com%2FOther%2FAI-NSX-T%2FVMware% 2FVMWare%2520NSX-T%2FDocuments% 2Fnsxt_21_admin.pdf&usg=AOvVaw2DqQfqPkhzWQfiJP2SgNbO (213) - C. Port Mirroring
- D. Traceflow
Answer: D
NEW QUESTION 28
Which three services are compatible with VRF Lite? (Choose three.)
- A. Intrusion Detection
- B. NAT
- C. Load Balancer
- D. DHCP
VRF Lite is not compatible with the following services:
-VPN
-Load Balancer
Taken from NSX-T ICM 3.0 Lecture Manual. - E. VPN
Answer: A,B,D
NEW QUESTION 29
Which CLI command is used to start the NSX Manager virtual machine in the KVM environment?
- A. virsh start <NSX-Manager-ID>
- B. virsh start <NSX-Manager-Name>
- C. virsh poweron <nsx-manager-name>
- D. virsh poweron <nsx-manager-ID>
Answer: B
Explanation:
Explanation/Reference:
NEW QUESTION 30
What are two supported N-VDS modes? (Choose two.)
- A. Secure Datapath
- B. Enhanced Datapath
- C. Standard Datapath
- D. DPDK Datapath
- E. Overlay Datapath
Answer: B,C
NEW QUESTION 31
Which CLI command should be executed on a KVM hypervisor to retrieve the VM interface UUID?
- A. virsh show <VM Name> | grep interfaceid
- B. virsh dumpxml <VM Name> | grep interfaceid
- C. virsh get-interface <VM Name>
- D. virsh list-interface <VM Name>
Answer: B
Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf
NEW QUESTION 32
An NSX administrator has configured a KVM hypervisor as a transport node. Which kernel module on KVM implements a N-VDS?
- A. dyswitch
- B. openvswitch
- C. nsx-vswitch
- D. etherswitch
Answer: B
NEW QUESTION 33
An administrator has a requirement to have consistent policy configuration and enforcement across NSXT instances. What feature of NSX-T Data Center fulfills this requirement?
- A. Policy-driven configuration
- B. Federation
- C. Multi-hypervisor support
- D. Load balancer
Answer: A
NEW QUESTION 34
How is the intra-tier transit link connection created between SR and DR for a Tier-0 Gateway?
- A. Automatically created when SR is initialized.
- B. Manually create a gateway interface and mark it as transit.
- C. Automatically created when DR is created.
- D. Manually create external uplink interface and mark it as transit.
Reference: https://blogs.vmware.com/networkvirtualization/2018/01/nsx-t-routing-part-2.html/
Answer: A
NEW QUESTION 35
Which CLI command on NSX Manager and NSX Edge is used to change NTP settings?
- A. set timezone
- B. set ntp-server
- C. et time-server
- D. get timezone
Answer: B
NEW QUESTION 36
......
Difficulty in Writing Professional VMware NSX-T Data Center 2V0-41.20 Exam
One of the most important certifications that applicants may have on their resume is Professional VMware NSX-T Data Center 2V0-41.20 certified. One of the key problems faced by most candidates is to choose the right research materials for their exam preparation since they use the internet to find too much data that makes it difficult for them to trust, which would be helpful for them.
Professional VMware NSX-T Data Center 2V0-41.20 exam is not an easier one and can turn out to be a very difficult certification if not well prepared. If professionals give 2V0-41.20 practice exams, they can better prepare for the exam while having understanding of the exam format and types of questions asked.
Applicants may, however, clear the exam with the right concentration and the right preparation material. Prep4sures have the most up-to-date learning materials, having a fair understanding of the question trend being asked in real certification with the help of these 2V0-41.20 practice exams aspirants. For all of the changes in the course, the experts check Prep4sures 2V0-41.20 exam dumps. Prep4sures also include practise testing, which proves to be an outstanding forum for testing the information gained. Refer to the links down below to access the study materials.
2V0-41.20 Exam Dumps - Try Best 2V0-41.20 Exam Questions: https://freedownload.prep4sures.top/2V0-41.20-real-sheets.html