The Realest Study Materials 156-835 Dumps Updated Mar 03, 2024
LATEST 156-835 Exam Practice Material
CheckPoint 156-835 certification exam is a valuable credential for professionals who want to demonstrate their expertise in managing and deploying Check Point Maestro. 156-835 exam covers a wide range of topics related to Check Point Maestro architecture, deployment, management, troubleshooting, and performance optimization. By obtaining this certification, individuals can enhance their career opportunities and demonstrate their commitment to staying up-to-date with the latest security technologies and trends in the industry.
Professionals with this certification can work in various roles, including network security engineers, system administrators, security architects, and security consultants. Check Point Certified Maestro Expert certification provides the potential to work with a diverse team of professionals who are capable of maintaining an organization's security posture.
CheckPoint 156-835 exam is an advanced certification that validates the skills required to manage and deploy Check Point Maestro solutions. Check Point Certified Maestro Expert certification is highly valued in the industry and is designed for professionals who have experience in managing complex security infrastructures. To pass the exam, candidates need to have a thorough understanding of Check Point Maestro architecture, deployment, and management, as well as the best practices for deploying and managing Check Point Maestro solutions.
NEW QUESTION # 18
In case of Correction, where is information about Owner stored?
- A. In Correction table of Target Appliance
- B. In Connection table of Target Appliances
- C. In Correction tables of all Appliances participating in Correction Layer flow
- D. In Connection tables of all Appliances participating in Correction Layer flow
Answer: D
NEW QUESTION # 19
Which setting is required in order to connect an appliance with 40Gbps downlink interface and DAC to the Orchestrator MHO-140?
- A. On Orchestrator: Change port type from uplink to downlink
- B. On Orchestrator: Change QSFP mode from 100Gbps to 40Gbps
- C. No change required
- D. On Appliance: Change a port speed to 10Gbps
Answer: A
NEW QUESTION # 20
What is the purpose of g_tcpdump command?
- A. Collects traffic dump from all Active Appliances within Security Group
- B. Collects traffic dump from CIN network
- C. The same as tcpdump, just on Scalable Platform
- D. Collects traffic dump from Sync network
Answer: A
NEW QUESTION # 21
In case of VSX: What is the right command to see overall performance details of all Appliances within the Security Group and all Virtual Systems?
- A. asg pert -v -p
- B. asg pert -vs all -v -vv
- C. asg pert -v
- D. asg pert -vs enabled -p
Answer: B
NEW QUESTION # 22
What cannot be learned from the output of asg perf -v -p command?
- A. Average CPU usage on Orchestrators
- B. Average CPU usage on Appliances
- C. Per-path distribution
- D. Real-time throughput
Answer: A
NEW QUESTION # 23
What is the throughput penalty of Security Group?
- A. 10% per Security Group with no relation to amount of members
- B. 5% per member
- C. 1% per member
- D. Depends on the type of Appliance
Answer: D
NEW QUESTION # 24
For a VSX configuration - Which statement is wrong?
- A. Each Appliance owns different Virtual Systems
- B. All Virtual Systems exist on all Appliances
- C. All Virtual Systems exist on the SMO
- D. VSX configuration is the same on all Appliances within the same Security Group
Answer: C
NEW QUESTION # 25
What is the purpose of RJ-45 connectors located at the front panel of the Orchestrator MHO-170?
- A. 1Gbps connectivity for Security Groups
- B. Out-of-band interface for access to Orchestrator itself and Serial Console connector
- C. Two Out-of-band interfaces for access to Orchestrator itself
- D. Reserved for internal purposes. Not in use
Answer: B
NEW QUESTION # 26
What will happen in case of NAT of the traffic passing through Management network?
- A. Orchestrator will disable NAT and traffic will pass with no issue
- B. This traffic will pass with no inspection
- C. Since Management traffic is always going to SMO, it will take a care for Correction Layer and will re-distribute traffic to other Appliances
- D. This traffic will not pass correction, since it will be dropped
Answer: D
NEW QUESTION # 27
What does asg monitor command do?
- A. Show real-time cluster status of Appliances in Security Group
- B. Monitor traffic on Appliances in Security Group
- C. This command does not exist
- D. Monitor health status of entire system
Answer: A
NEW QUESTION # 28
There are two appliances within the same Security Group. One of them is connected by One downlink only, another one by Two downlinks. Assuming there's no NAT and no VPN, what would be proportion of traffic distribution done by Orchestrator?
- A. 33%/66%
- B. 50%/50%
- C. 66%/33%
- D. 100%/0%
Answer: B
NEW QUESTION # 29
Which licenses should be issued for the Orchestrator?
- A. Depends on Software Blades enabled on connected appliances
- B. The Orchestrator requires NGTX license
- C. The Orchestrator is considered a Management server, hence it's licensed the same way
- D. No licenses are required for Orchestrator
Answer: D
NEW QUESTION # 30
What cannot be learned from the output of asg monitor command?
- A. Port status
- B. Uptime
- C. Appliances cluster status
- D. Security Policy status
Answer: A
NEW QUESTION # 31
What kind of cluster Dual-Site can be compared to?
- A. VSLS only
- B. Active-Standby or VSLS
- C. Active-Standby only
- D. Active-Active
Answer: D
NEW QUESTION # 32
What is the purpose of Management ports located on the Rear Panel of the Orchestrator MHO-140?
- A. Additional ports used as uplinks.
- B. 1Gbps connectivity for Security Groups.
- C. Out-of-band interfaces for access to Orchestrator itself.
- D. Reserved for internal purposes. Not in use.
Answer: C
NEW QUESTION # 33
In order to set Site (chassis) priority per VS, following command should be used:
- A. From VSO context: set chassis high-availability vs <vsid> chassis_priority
- B. From given VSO context: set chassis high-availability vs chassis_priority
- C. From any VS context: set chassis high-availability vs <vsid> chassis_priority
- D. From given VS context: set chassis high-availability vs chassis_priority
Answer: B
NEW QUESTION # 34
What is a downlink interface used for?
- A. To connect Orchestrators to customer's infrastructure
- B. To connect in between Orchestrators
- C. To connect appliances to customer's infrastructure
- D. To connect appliances to Orchestrators
Answer: D
NEW QUESTION # 35
Which command will be used in order to restart Orchestrator service only?
- A. cpstop; cpstart
- B. service orchestrator restart
- C. reboot
- D. orchd restart
Answer: B
NEW QUESTION # 36
Which command will be used in order to restart Orchestrator service only?
- A. orchd restart
- B. cpstop; cpstart
- C. service orchestrator restart
- D. reboot
Answer: A
Explanation:
Page 313 from the training manual:
- Restart the service:
orchd restart
- Restart the service without confirmation
service orchd restart
NEW QUESTION # 37
......
Study HIGH Quality 156-835 Free Study Guides and Exams Tutorials: https://freedownload.prep4sures.top/156-835-real-sheets.html